Thermal Lamination Film(BOPP/PET plain film+ EVA glue);Hot laminating film;thermal laminating film

Thermal laminating film is a 2layer product which consists of basic film and adhesive.It is suitable for dry laminating

the basic layer of film doesn't melt at laminating temperature.It is produced through the extrusion coating process.where the adhesive is applied to the film.when heated,the adhesive melts to a tacky condition where is married to the printed sheet under extreme pressure.when cooled to a solid again.the adhesive provides a high strenght chemical bond.our adhesives give superior bond strengths on a wide variety of subject material.such as paper,board,metal ,plastics,etc

Process Parameter:

Equipment for laminating film:dry and wet film laminator

Temperature:85-100 0C    Special:100 -120 0C

Roller pressure: 10-18 Mpa

Speed: 8 - 50 m/min

Remarks:Special laminations refer to those with thicker ink,solid color,high moisture content and bigger size paper.

 

Bopp thermal lamination film Gloss & Matt)
SPECIFICATION & PARAMETER
SPECIFICATION		24MIC GLOSS	25MIC GLOSS	27MIC GLOSS	30MIC  GLOSS	25MIC MATT		27MIC MATT		30MIC MATT
THICKNESS(UM)	BASE	12	12	15	18	15		15		18
	EVA	12	13	12	12	10		12		12
	TOTAL	24	25	27	30	25		27		30
WEIGHT	/kg	45.04	43.22	40.1	36.15	44.24		40.84		36.87
	kg/	0.222	0.0231	0.025	0.02766	0.0226		0.02448		0.02712
Width	140 190 200 360 390 440 540 590 780 880 1080 1320 1400 1600 1800   Upon customers requirement
Lenghth	300 - 6,000 more or less 10% allowed
Corona Treatment  Side	ONE SIDE			BOTH SIDE
Connector	2   Less than 2
TENSILE STRENGTH	MD:3.1*106 dyne/cm          CD:6.1*106 DYNE/cm
Paper Core(inter Dia	25.4mm(1 inch);58mm(2.25 inch);76mm(3 inch)

PS

24MIC2.4C0.945MIL

25MIC2.5C0.984MIL

27MIC2.7C1.06MIL

30MIC3.0C1.18MIL